GRAND FALLS, NEW BRUNSWICK
Buy and Sell - Achat et vente
For Sale
Complete 45-ft. scragg sawmill with log deck and cut-off saw. Includes an Evans short-log mill and air-activated chop saws plus all conveyors, transfer decks, log kickers, motors and electrical panels, 575v 3-phase.
Contact Herman or Joe Long at Scotia Pallets Ltd. at 1-800-565-3304 or joe@scotiapallets.com
For Sale
● Lift King all-terrain forklift with good set of ring chains. Bought new, one owner, great condition. $17,000.
● Concept Aire dust silo, 100-hp body, 75 hp energy efficient motor, replacement cost $160K; asking $42,000 as is where is.
● Samuel orbital stretch wrapper for variable length wrapping, with wrap, $3,500
● Electric welder 575v 3-phase, with accessories, plus torch and gas, $1,200
● About 30,000 AirFlow profiled kiln stickers,
1” x 1” x 42”, $250 per lift.
Contact Candace Christiano at 902-295-2874 or
902-295-3421 (home) or candace@finewoodflooring.ca
For Sale
Weinig Unimat Gold 6-head moulder. No heads or grinder. Used very little, stored indoors. Call Elmer Lohnes at
902-543-3010.
For Sale
● Delta shrink-film wrapper and heat seal tunnel, 12”x16”x72”, 220-v 3-phase, used very little.
● Unique Machine Tool Mod. 3450 mortice-andtenon machine.
● Cornell sawmill combination edger
● Straight-line ripsaw, oldie but a goodie
Contact Stewart Lewis at Lewis Mouldings and Wood Specialties 902-837-7393 or sjlewis@pei.aibn.com
For Sale
● Complete roof truss operation with 3-saw cut line and 2 hydraulic presses, all electrics in place 600-v 3-phase, mostly rebuilt, includes about $6,000 worth of truss plates, various sizes.
● New 34-foot sloped 5th-wheel truss trailer
● Dominion 12” x 20” sash-gang saw with 100-hp main motor 600-v 3-phase, includes grinder/sharpener and about 100 spare blades (some used, some new).
All located in St. Stephen, NB. Contact David Moore at 506-466-5528.
For Sale
● NYLE 30-HP dry kiln with fans, chart recorder and oil furnace. $3500 as is where isLift King all-terrain forklift with good set of ring chains. Great condition $17,000
● Concept Aire dust silo, 100-HP body, 75-HP energy efficient motor. $42,000 as is where isSamuel orbital stretch wrapper, with wrap. $3,500Electric welder 575v
3-phase, with accessories, plus torch and gas. $1,20030,000
● AirFlow profiled kiln sticks, 1”x1”x42”. 1500 sticks per lift, new price $150 per liftContact Peter or Candace
Christiano at Candace@finewoodflooring.ca or 902-295-3421
For Sale
● Delta shrink-film wrapper and heat seal tunnel, 12”x16”x72”, 220-v 3-phase.
● Unique Machine Tool Mod. 3450 mortice-and tenon machine.
● Cornell sawmill combination edger
● Straight-line ripsaw, oldie but a goodie
Contact Stewart Lewis, Lewis Mouldings and Wood Specialties at sjlewis@pei.aibn.com
For Sale
● 45-ft. scragg mill with log deck and cut-off saw. Includes a short-log mill and air-activated chop saws plus all conveyors, transfer decks, log kickers, motors and electrical panels, 575v 3-phase.
Contact Herman or Joe Long at Scotia Pallets Ltd. at 1-800-565-3304 or joe@scotiapallets.com
For Sale
● Complete roof truss operation with 3-saw cut line and 2 hydraulic presses, all electrics in place 600-v 3-phase, mostly rebuilt, includes about $6,000 worth of truss plates, various sizes.
● New 34-foot sloped 5th-wheel truss trailer
● Dominion 12” x 20” sash-gang saw with 100-hp main motor 600-v 3-phase, includes grinder/sharpener and about 100 spare blades (some used, some new).
All located in St. Stephen, NB. Contact David Moore at 506-466-5528.
Wanted
● Spare heads and feed wheels for a Weinig Unimat moulder. 40 mm bore, 4-knife heads, 4” or 6” width.
Call Dale Boucher at Junction Lumber, Bathurst NB at 506-548-3669.
Wanted
● A good used four-sided planer. Call Troy or Carla at Miramichi Timber Frames at 506-773-8993.