Buy and Sell Ads
Complete 45-ft. scragg sawmill with log deck and cut-off saw. Includes an Evans short-log mill and air-activated chop saws plus all conveyors, transfer decks, log kickers, motors and electrical panels, 575v
3-phase. Contact Herman or Joe Long at Scotia Pallets Ltd. at 1-800-565-3304 or email@example.com
● Lift King all-terrain forklift with good set of ring chains. Bought new, one owner, great condition. $19,000.
● Concept Aire dust silo, 100-hp body, 75 hp energy efficient motor, replacement cost $160K; asking $42,000 as is where is.
● Samuel orbital stretch wrapper for variable length wrapping, with wrap, $5,000
● Electric welder 575v 3-phase, with accessories, plus torch and gas, $1,500
● About 30,000 AirFlow profiled kiln stickers, 1” x 1” x 42”, $250 per lift.
Contact Candace Christiano at 902-295-2874 or firstname.lastname@example.org
Weinig Unimat Gold 6-head moulder. No heads or grinder. Used very little, stored indoors. Call Elmer Lohnes at
● Wadkin GD220 5-head moulder, goodshape, 3-phase, $10,000 obo.
● Nyle dry kiln, 5000 fbm capacity, 3 fans and exhaust, $6,000 obo.
Call Martinus Rose at 902-838-5465 (office) or 902-969-7599 (cell).
● Two Locatelli fully automatic hydraulic copier lathes, excellent condition. Price for one: $10,000. Price for both: $15,000
● Two-head bottom sander. $2,500
Contact Eddy Boucher at 506-576-6430 or email@example.com
● Delta shrink-film wrapper and heat seal tunnel, 12”x16”x72”, 220-v 3-phase, used very little.
● Unique Machine Tool Mod. 3450 mortice-andtenon machine.
● Cornell sawmill combination edger
● Straight-line ripsaw, oldie but a goodie
Contact Stewart Lewis at Lewis Mouldings and Wood Specialties 902-837-7393 or firstname.lastname@example.org
● Complete roof truss operation with 3-saw cut line and 2 hydraulic presses, all electrics in place 600-v 3-phase, mostly rebuilt, includes about $6,000 worth of truss plates, various sizes.
● New 34-foot sloped 5th-wheel truss trailer
● Dominion 12” x 20” sash-gang saw with 100-hp main motor 600-v 3-phase, includes grinder/sharpener and about 100 spare blades (some used, some new).
All located in St. Stephen, NB. Contact David Moore at 506-466-5528.
● Cantek planer/sander, 30hp, 575v, $29,850
● RUF 1500 briquetting machine, 2009, $239,500
● Bimatic edge bander, 2002, 230v 3-ph, $15,900
Call Christian Landry at Akhurst Machinery in Moncton 506-857-3108 or email@example.com